Jeep Wrangler Tire Pressure 

When inflating your Jeep Wrangler, the recommended tire pressure is between 36 and 38 pounds per square inch (PSI) for both the front and rear tires. Sticking with this air pressure will guarantee safe driving and improved tire performance.

However, as you already know, the Jeep Wrangler varies by model year, trim, and OEM wheel size. So you want to focus on the recommended tire pressure for your type of Jeep Wrangler.

For this reason, it is usually ideal for checking your owner’s manual or the placard attached to the driver’s side door jamb of your Wrangler.

Even when you have access to the information in the tag, interpreting the specifics can be difficult. That’s why I’ve done the rough work for you. 

In the rest of this post, you will see the recommended tire pressures for the Jeep Wrangler, sorted by their distinguished model year, trim level, and wheel size.

 

Tire pressure table for Jeep Wrangler models and tire size

Being a sport utility vehicle, the Jeep Wrangler is offered in 40 trims and equipped with 15 sets of original equipment tires trim. You can sort through this chart to find the recommended tire pressure for your particular Jeep Wrangler model year, model trim, and original equipment tire size.

    Recommended Tire pressure
Jeep Wrangler Year Model Tire Size Front tire Rear tire
2021 245/75R17 112T 36 – 38 psi 36 – 38 psi
  255/70R18 113T 36 psi 36 psi
  275/55R20 113T
  LT255/75R17/C

111/108Q

37 psi 37 psi
  LT285/70R17/C 116/113Q
 
2020 245/75R17 112S 36 psi 36 psi
  255/70R18 113T
  LT255/75R17/C 111/108Q 37 psi

 

37 psi
  LT285/70R17/C 116/113Q
 
2019 245/75R17 112S 36 psi 36 psi
  255/70R18 113T
  LT255/75R17/C 111/108Q 37 psi 37 psi
  LT285/70R17/C 116/113Q
 
2018 245/75R17 112S 35 psi 35 psi
  255/70R18 113S
  LT255/75R17/C 111/108Q 37 psi 37 psi
  LT285/70R17/C 116/113Q
 
2017 LT255/75R17/C 111/108Q 37 psi 37 psi
  P225/75R16 104S 35 psi 35 psi
  P245/75R16 109T
  P255/70R18 112S
  P255/75R17 113S
 
2016 LT255/75R17/C 111/108Q 37 psi 37 psi
  P225/75R16 104S 35 psi 35 psi
  P245/75R16 109T
  P245/75R17 110T
  P255/70R18 112S
  P255/75R17 113S
 
2015 LT255/75R17/C 111/108Q 37 psi 37 psi
  P225/75R16 104S 35 psi 35 psi
  P245/75R16 109T
  P255/70R18 112S
  P255/75R17 113S
 
2014 LT255/75R17/C 111/108Q 37 psi 37 psi
  P225/75R16 104S 35 psi 35 psi
  P255/70R18 112S
  P255/75R17 113S
 
2013 LT255/75R17/C 111/108Q 37 psi 37 psi
  LT265/70R17/E 121/118Q 43 psi 43 psi
  P225/75R16 104S 35 psi 35 psi
  P255/70R18 112S
  P255/75R17 113S
 
2012 LT255/75R17/C 111/108Q 37 psi 37 psi
  P225/75R16 104S 35 psi 35 psi
  P255/70R18 112S
  P255/75R17 113S
 
2011 LT255/75R17/C 111/108Q 37 psi 37 psi
  P225/75R16 104S 35 psi 35 psi
  P255/70R18 112S
  P255/75R17 113S
 
2010 LT255/75R17/C 111/108Q 37 psi 37 psi
  P225/75R16 104S 35 psi 35 psi
  P255/70R18 112S
  P255/75R17 113S
 
2009 LT255/75R17/C 111/108Q 37 psi 37 psi
  P225/75R16 104S 35 psi 35 psi
  P255/70R18 112S 30 – 35 psi 35 psi
  P255/75R17 113S
 
2008 LT255/75R17/C 111/108Q 37 psi 37 psi
  P225/75R16 104S 35 psi 35 psi
  P245/75R16 109S 30 psi 35 psi
  P255/70R18 112S 30 – 35 psi 35 psi
  P255/75R17 113S
 
2007 LT255/75R17/C 111/108Q 37 psi 37 psi
  P225/75R16 104S 35 psi 35 psi
  P245/75R16 109S 30 psi 35 psi
  P255/70R18 112S 35 psi 35 psi
  P255/75R17 113S          30 psi 35 psi
 
2006 30×9.50R15/B 96H 29 psi 29 psi
  LT245/75R16/E 120/116P 33 psi 33 psi
  P215/75R15 100S
  P225/75R15 102S
 
2005 30×9.50R15/B 96H 29 psi 29 psi
  LT245/75R16/E 120/116P 33 psi 33 psi
  P215/75R15 100S
  P225/75R15 102S

 

Recommended tire pressure for jeep Wrangler trim levels

The Jeep Wrangler SUV can be grouped in terms of its trim levels. There are 10 categories, including Sport, Willys Sport, Sport S, Sport Altitude, Willys, Sahara, Sahara Altitude, Rubicon, High Altitude, and Rubicon 392

While these SUV trim levels may have distinct recommended tire pressures depending on the wheel size, the ideal tire pressure to inflate your Jeep Wrangler is between 36 and 38 PSI for both the Jeep’s front and rear tires.

 

How do I know how much air to put in my Jeep tires?

The information on the sticker attached to your Jeep’s driver’s door contains all the specifications about inflating your tires with the right pressure. However, by looking up your owner’s manual, you can also determine how much air you should put in your tires.

 

What is the proper tire pressure for Jeep Wrangler replacement tires?

While it is not ideal to replace Jeep Wrangler tires with non-stock tires, certain situations can leave you with no choice. In such situations, you should ensure you inflate the replacement tires with the right pressure, which is determined by the size and load capacity of the replacement tire.

 

When is the best time to replace Jeep Wrangler tires with new ones?

The best time to replace your Jeep Wrangler tires is when you notice low tread depth. However, under normal circumstances, your tires should be replaced every 50,000 miles or every three to four years of extensive usage.

Your driving environment, e.g., off-road or normal terrain, will determine the exact lifespan of your Jeep Wrangler tires.

 

What does the Jeep Wrangler TPMS warning light mean?

The TPMS light on your Jeep Wrangler dashboard may illuminate and stay on when one or more of your tires is underinflated or has suffered a puncture. However, you need to study the blinking sequence of the light.

For example, the TPMS warning light will likely flash for a few seconds when you start the vehicle. This could mean a problem with the monitoring system, which needs service.

Generally, the warning light is designed to alert you when your tires are losing air.

 

In Conclusion

The debate about what tire pressure is best for Jeep Wranglers may continue, especially in some local Jeep clubs.

This is probably because every Wrangler owner has an opinion about what works best for them and what does not.

Regardless, there is a recommended PSI to stick with when inflating your Jeep tires, and this will depend on the model year, trim level, tire brand, terrain, wheel size, vehicle weight, and even temperature in some cases.

With many things to consider, it is best to look at the information on the tag of your vehicle to see the right tire pressure for your particular vehicle.

If you need help interpreting the information there, I hope the tire pressure chart in the above article helps.


Fatal error: Uncaught ErrorException: md5_file(/home/tireful/public_html/wp-content/litespeed/css/ccbabf3fd6e0894edfccc8dea91c647c.css.tmp): Failed to open stream: No such file or directory in /home/tireful/public_html/wp-content/plugins/litespeed-cache/src/optimizer.cls.php:140 Stack trace: #0 [internal function]: litespeed_exception_handler(2, 'md5_file(/home/...', '/home/tireful/p...', 140) #1 /home/tireful/public_html/wp-content/plugins/litespeed-cache/src/optimizer.cls.php(140): md5_file('/home/tireful/p...') #2 /home/tireful/public_html/wp-content/plugins/litespeed-cache/src/optimize.cls.php(837): LiteSpeed\Optimizer->serve('https://tireful...', 'css', true, Array) #3 /home/tireful/public_html/wp-content/plugins/litespeed-cache/src/optimize.cls.php(330): LiteSpeed\Optimize->_build_hash_url(Array) #4 /home/tireful/public_html/wp-content/plugins/litespeed-cache/src/optimize.cls.php(264): LiteSpeed\Optimize->_optimize() #5 /home/tireful/public_html/wp-includes/class-wp-hook.php(324): LiteSpeed\Optimize->finalize('<!DOCTYPE html>...') #6 /home/tireful/public_html/wp-includes/plugin.php(205): WP_Hook->apply_filters('<!DOCTYPE html>...', Array) #7 /home/tireful/public_html/wp-content/plugins/litespeed-cache/src/core.cls.php(477): apply_filters('litespeed_buffe...', '<!DOCTYPE html>...') #8 [internal function]: LiteSpeed\Core->send_headers_force('<!DOCTYPE html>...', 9) #9 /home/tireful/public_html/wp-includes/functions.php(5427): ob_end_flush() #10 /home/tireful/public_html/wp-includes/class-wp-hook.php(324): wp_ob_end_flush_all('') #11 /home/tireful/public_html/wp-includes/class-wp-hook.php(348): WP_Hook->apply_filters(NULL, Array) #12 /home/tireful/public_html/wp-includes/plugin.php(517): WP_Hook->do_action(Array) #13 /home/tireful/public_html/wp-includes/load.php(1280): do_action('shutdown') #14 [internal function]: shutdown_action_hook() #15 {main} thrown in /home/tireful/public_html/wp-content/plugins/litespeed-cache/src/optimizer.cls.php on line 140